4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports
Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đSwitch công nghiệp 4 cổng Gigabit PoE Ethernet + 1 cổng Combo Gigabit SFP ICP DAS NSM-205GP CR
Feature
• Full Gigabit Ethernet ports
• 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
• Supports 10 KB jumbo frames
• Pluggable SFP transceiver port
• Supports Auto Negotiation and Auto MDI/MDI-X
• Supports Dual +18 ~ 55 VDC power input and 1 relay output
• Supports operating temperatures from –40 ~ +75°C
• DIN-Rail Mounting, Wall Mounting (optional)
Introduction
The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD). Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports.
Application
Specifications
| LED Indicators | |
|---|---|
| Status | PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected |
| Ethernet | |
|---|---|
| Ports | 4 x RJ-45, 10/100/1000Base-T 1 x RJ45 /SFP Slot Combo, 10/100/1000Base-T |
| Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward, wire speed switching |
| MAC Table | 8 K |
| Memory Bandwidth | 10 Gbps |
| Frame Buffer Memory | 1 Mbit |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Jumbo Frames | 10 K for Speed 1000M |
| Isolation | 1500 Vrms 1 minute |
| DIP Switch | 100BaseSFP/1000BaseSFP and PoE/PoE+ setting |
| PoE Technology | |
|---|---|
| PoE Compliance | 100% IEEE 802.3at compliant |
| PoE Power | Up to 30 watts per channel |
| PoE Operation | Automatic detection and power management |
| PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
| PoE Disconnect Mode | DC disconnect |
| Fiber | |
|---|---|
| Ports | 1 x 1000Base /100Base SFP slot |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +18 ~ +55 VDC Redundant Dual Inputs |
| Redundant Power Inputs | Yes |
| Consumption | 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports) 0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports) |
| Alarm Output | Yes,Relay 1 A @ 30 VDC |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) | DIN-rail mounting: 28 x 160 x 121 (W x L x H) Wall mounting: 28 x 199 x 114 (W x L x H) |
| Installation | DIN-rail mounting or wall mounting (optional) |
| Ingress Protection Rating | IP30 |
| Environment | |
|---|---|
| Operating Temperature | -40 °C ~ + 75 °C |
| Storage Temperature | -40 °C ~ + 85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Download
Ordering Information
| NSM-205GP CR | 4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports (RoHS) |
