Module 4 kênh đầu vào số + 5 kênh đầu ra DC SSR kết nối RS-485 DCON & Modbus RTU ICP DAS M-7065BD

Chia sẻ

Thương hiệu: ICP DAS Loại: Module RS-485

Tình trạng: Còn hàng

Mã sản phẩm: M-7065BD

4-channel Isolated Digital Input and 5-channel DC SSR Output Module using the DCON and Modbus Protocols with LED Display

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

Mô tả sản phẩm

Module 4 kênh đầu vào số + 5 kênh đầu ra DC SSR kết nối RS-485 DCON & Modbus RTU ICP DAS M-7065BD

Features

I-7063B(D)
- 8 Digital Input channels and 3 DC SSR Output channels
I-7065B(D) and M-7065B(D)
- 4 Digital Input channels and 5 DC SSR Output channels
Form A DC Solid State Relay Output
No Arcing, No Bounce, and No Switching Noise
Sink- and Source-type for Digital Input
Digital Input Channels can be used as 16-bit Counters
Configurable Power-on Value Settings
Configurable Safe Value Settings
Dual Watchdog
Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The I-7063B module provides 8 digital input channels and 3 DC SSR output channels, and the I-7065B provides 4 digital input channels and 5 DC SSR output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. In comparison to electromechanical relays, SSR technology provides a faster response time and greater electrical endurance. The integration of DC SSR technology also eliminates potential for arcing, bounce, and switching noise. The I-7063BD provides 11 LED indicators and the I-7065BD/M-7065BD provides 9 LED indicators that can be used to monitor the status of the digital input and SSR output. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The M-7065B supports both the Modbus RTU and DCON protocols, which can be configured via software.

Application

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

I/O Specification

Models		I-7063B/I-7063BD	I-7065B/I-7065BD	M-7065B/M-7065BD
DC Solid State Relay Output
Channels		3	5
Relay Type		DC-SSR (Form A)
Form A DC-SSR	Operating Voltage Range	3 ~ 30 VDC
	Max. Load Current	1 A
	Leakage Current	0.1 mA
	Min. Operate Time	1 ms
	Min. Release Time	1 ms
	Dielectric Strength	3500 VDC
	Electrical Endurance	Long Life, No Arcing, No Bounce, No Switching Noise
Power-on Value		Yes
Safe Value		Yes
Digital Output
Channels		8	4
Type	Dry Contact	-
	Wet Contact	Sink/Source
Wet Contact	On Voltage Level	+1 VDC Max.
	Off Voltage Level	+4 ~ 30 VDC
Dry Contact	On Voltage Level	-
	Off Voltage Level	-
	Effective Distance for Dry Contact	-
Counters	Max. Count	65535 (16-bit)
	Max. Input Frequency	100 Hz
	Min. Pulse Widt	5 ms
Input Impedance		3 kΩ
Channel-to-Channel Isolation		-
Overvoltage Protection		±35 VDC

System Specification

Models	I-7063B	I-7063BD	I-7065B	I-7065BD	M-7065B	M-7065BD
Communication
Interface	RS-485
Format	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate	1200 ~ 115200 bps
Protocol	DCON				Modbus RTU, DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator	Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators	-	Yes, 11 LEDs as Digital Input/ Relay Output Indicators	-	Yes, 9 LEDs as Digital Input/ Relay Output Indicators	-	Yes, 9 LEDs as Digital Input/Relay Output Indicators
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	3750 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
	±8 kV Air for Random Point
EFT (IEC 61000-4-4)	±2 kV for Power Line
Surge (IEC 61000-4-5)	-
Power
Reverse Polarity Protection	Yes
Input Range	10 ~ 30 VDC
Consumption	0.5 W	1.0 W	0.6 W	1.0 W	0.6 W	1.0 W
Mechanical
Dimensions (W x L x H)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 ~ +75°C
Storage Temperature	-40 ~ +85°C
Humidity	10 ~ 95% RH, Non-condensing

Download

Odering information

I-7063B CR	8-channel Isolated Digital Input and 3-channel DC SSR Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7063BD CR	I-7063B with LED Display (Blue Cover) (ROSH)
I-7065B CR	4-channel Isolated Digital Input and 5-channel DC SSR Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7065BD CR	I-7065B with LED Display (Blue Cover) (ROSH)
M-7065B-G CR	4-channel Isolated Digital Input and 5-channel DC SSR Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7065BD-G CR	M-7065B-G with LED Display (Gray Cover) (ROSH)