Mô tả

Bộ lập trình PLC – Module CPU Cimon CM1-XP3A

Tính năng

  • Điều khiển PID mà không cần mô-đun PID bổ sung.
  • RTC – Đọc thời gian từ mô-đun RTC và lưu trữ giá trị tại vị trí bộ nhớ thanh ghi F.
  • Phát hiện xem card đã được lắp vào khe chỉ định hay chưa.
  • Khi mở rộng hoặc trao đổi card, có thể bảo lưu để viết chương trình mà không cần thực hiện thay đổi I / O.
  • Sửa đổi chương trình trong chế độ RUN
  • Thay thế mô-đun trong chế độ RUN (không áp dụng cho model XPnA)

Chức năng tự chẩn đoán

  • Giám sát độ trễ xử lý – có thể theo dõi độ trễ xử lý do lỗi chương trình người dùng.
  • Kiểm tra xem mô-đun đã được tháo ra khỏi base hoặc được gắn không hoàn toàn trên base hay chưa.
  • Lỗi bộ nhớ – nếu lỗi xảy ra trong bộ nhớ flash CPU hoặc trong thẻ, lỗi sẽ hiển thị ở vị trí bộ nhớ thanh ghi F.
  • F0034 sẽ ON khi cần thay pin.
  • Nếu điện áp cung cấp cho nguồn thấp hơn mức yêu cầu, lỗi nguồn sẽ được phát hiện và các biện pháp ngăn ngừa sự cố sẽ tự động được thực hiện

Thông số kỹ thuật

Item CM1-XP1A CM1-XP2A CM1-XP3A
Program Control Repetitive operation, Stored Program (ROM mode), Periodic operation
Method for Controlling I/O Indirect method, Direct method by instruction, Scan synchronous batch processing system (I/O refresh)
Program Language LD(Ladder Diagram), IL(Instruction List), SFC(Sequential Function Chart), FB (Function Block), FB Extension
Number of Instruction Basic Instruction : 60 , Application instruction : 480
Data
Processing
LD 0.028㎲/step
Floating
Point
Arithmetic
+, -, x, / : 0.4μs / Instruction
Program Memory 7M Byte(Including Upload, Parameter, System)
Number of Program Block Max 128, up to 65,530 STEPs per block (PID)
Number of I/O 8,192 4,092 2,048
Number of I/O Device Input : 131,072 points, output : 131,072 points
Supporting
Program
LD Scan, Subroutine, Initialize (COLD), Initialize (HOT), Periodic interruption
Special
Configuration
Initializing special card, PID control, Thermistor setting, Loadcell setting, IO Input module filter setting
Communication User protocol(Serial), User protocol(Ethernet), MODBUS TCP/RTU Master, Ethernet High-speed link, CIMON-NET Master /
Slave, DNP3, Public network IP setting,
SFC SFC Program
Periodic Interruption Maximum 15, cycle setting (10~60,000msec, Unit :10ms), priority setting(0~14)
Base Expansion Maximum 16, Ring structure redundancy
Max. Distance S TYPE (Electricity 100M)
Redundancy
RUN mode LOCAL / Remote (RUN, STOP, PAUSE)
Restarting Cold, Hot Restart
Self-Diagnosis Monitoring delay of processing, problems of memory, IO, battery, power error
Data Preservation Against
Power Failure
K device and conservation (Latch) in M, L, T, C, S, D device
WDT Maximum 5000msec (Unit: 10msec)
Timer On Delay, Off Delay, Addition, Monostable, Retriggerable
Cycle: Either 10 or 100msec TC(Current value)/TS(Setting value)
Counter UP, DOWN, UP/DOWN, RING COUNTER,
CC(Current value)/CS(Setting value)
No limitation on number of points
Count range : -32,768 ~ +32,767
PID 32 Channels, Auto-Tuning
Communication
Channels
USB USB 2.0 Mini-B : For Loader Protocol
Serial RS-232C (Maximum 38,400bps) : CICON Loader / Connection  Type: RJ11
Event Log (Power, Mode, Error)
Power 5Vdc, 315mA
Weight(g) 157g
Floating Point
Arithmetic
Supporting instructions for floating point arithmetic
Capacity of Scan Program 128K Step                   64K Step          64K Step
Device
Memory
X 8,192 4,096 2,048
Y 8,192 4,096 2,048
M 16,000
L 16,000
K 16,000
F 2,048
T 4,096 (Select between 10ms and 100ms)
C 4,096
S 100Card * 100Step
D 32,000 Word
Z 1,024 Word
R 16 Word
Q 512 Word

Thông tin đặt hàng

  • CM1-XP3A

64K step / 75 ns / 2048 pts / RTC / USB Port / Floating point arithmetic / Expandable

Tài liệu

Catalog + Manual

Phần mềm lập trình PLC

Đăng nhập
Đăng ký
Hotline: 0904251826
x